/About Equipment
About Equipment2020-02-29T06:46:44-05:30

We have Kavo dental chairs manufactured in Brazil. They are designed to ensure biosafety and ergonomics in the dental office. They offer compact design, embedded pipes and seamless finish, all to support the dentist and his team in dental workflow. The integration of engineering in Brazil and Germany and partnerships with national and international Universities for studies and research also ensure that you enjoy the best and the latest technology in the dental industry.

Chair comes with silent and smooth movement. The chair reaches close to the ground, which enables the patient to get onto the chair easily. Pivoting pointer between the seat’s backrest and seat is designed with ergonomic consideration to ensure that patient is comfortable in all positions of the chair Upholstery covered with 100 % laminated PVC, a noble material without weaves on the inside part which provides a better finish and durability. Fully-articulated arm allows lighting of lower lingual arch and treatment of wheelchair user patients.

Patient is absolutely comfortable even if there are long hours of dental treatment at a time.

An OPG is a panoramic or wide view x-ray of the lower face, which displays all the teeth of the upper and lower jaw on a single film.
It demonstrates the number,position and growth of all the teeth including those that have not yet surfaced or erupted.
It is different from the small close up x-rays dentists take of individual teeth.
An OPG may also reveal
1. Problems with the jawbone and the joint which connects the jawbone to
the head, called the Temporomandibular joint or TMJ.
2. An OPG may be requested for the planning of orthodontic treatment,
3. For assessment of wisdom teeth
4. For a general overview of the teeth and the bone which supports the teeth
5. To know the amount of root formation and the eruption levels of permanent teeth.

The carestream 8100 OPG machine is designed to make positioning of patients quick and simple. It is easily accessible for patients sitting, standing and in wheelchairs.
Sharp and high quality images are taken in CS 8100. It minimizes the spinal column shadows and produces digitally sharp images that are ready to review almost immediately. High frequency generator ensures radiation remains constant for optimal contrast.
The design of the machine is both patient friendly (sleek looking) and operator friendly (plug and play)
The time taken for an OPG x ray will be between 11 to 14 seconds.

The clinic is equipped with Intra Oral camera to show you the problems in your mouth and also show you the treatment done for the same. Seeing the pictures under magnification makes one realize what exactly the problem in their mouth is and accept the planning of treatment proposed.

All the dental chairs have been fixed with Dell LCD monitors by which all the photographs and x-rays taken during the initial examination and further treatment procedures are displayed for patient education.

We have motorized suction units which help suck the saliva, blood and water in the patient’s mouth at a very high speed and reduce the discomfort to the patient and increase the efficiency of the dentists work.

The satelec scaler units come with 4 tips designed for calculus and stain removal from all parts of the teeth. The sickle shaped tip, surface scaler tip and inter dental tips. They are designed to conserve teeth and meet all clinical requirements.

The new X-Mind DC generator is filled with a Toshiba DG-073B-DC double anode tungsten tube (intensity of 4mA and 8mA) that generates a constant voltage of 60 kV or 70 kV. It operates at high frequencies and constant potential which enables very high quality radiation to be emitted, whatever the conditions of use. The choice of voltage (60 or 70kV) and intensity (4 or 8 mA) enable optimal diagnosis of intraoral X-rays with a 35% reduction in exposure time, compared with monophased units. The timer can control up to two DC generators. The extremely short exposure times (minimum 0.02 sec) are suitable for digital radiology with CCD, CMOS or phosphur plate sensor (radiation is 50% less than that used with “E” type films).

                 

The Radio Visio Gram sensor is a sensor used to expose radiographs. This sensor provides an exceptionally high image quality, using the best technologies available.

SybronEndo’s EndoTouch TC2 is the next generation in cordless motors. The TC2 features a large LCD display, simple 5-key operation and a lightweight, ergonomic design to ensure comfort and ease of use during even the most delicate endodontic procedures. The auto reverse and alarm functions indicate the load is about to reach the pre-set torque level, allowing you to unload the file even before the auto reverse sets in.

Endo Apex locator has been designed to work in almost any canal condition. Whether the canal is dry, wet, bleeding, filled with saline, EDTA, sodium hypochloride or chlorhexidine, the Apex locator can still provide accurate, consistent and dependable readings. It helps the endodontist locate the length of the root precisely for root canal therapy.

The heat pluggers maximize condensation forces on the softened obturation material without placing undue stress on the root canal system. Therefore it is one of the most needed equipments for successful endodontic therapy.

The dental lasers from GIGAALASER is the most reasonable but advanced laser available for soft tissue dental applications, the special wavelength has high absorption in water and haemoglobin combines precise cutting properties with immediate coagulation. With 10KHz frequency, it can cut the soft tissue very fast and smoothly with less blood and less pain than ordinary dental surgery device. Aside from an application in soft tissue surgery, it is also used for other treatments such as decontamination, biostimulation and tooth whitening.

The compact body offers a wide variety of functions. The large backlit LCD display intuitive controls help reduce operating errors make procedures safer.

Applications:

  • Bone surgery
  • Sinus lifts
  • Extraction
  • Implant preparations

Loupes are ideal for general dental and surgical work when increased magnification and a large field of view are required. Loupes provide the right magnification for a dentist to visualize the area and treat the problem to perfection as against naked eye viewing.

Some of the benefits of using a dental magnification loupe are:

  1. Improved visual acuity
  2. Enhanced precision and accuracy
  3. Increases treatment speed
  4. Minimized eye strain
  5. Reduced occupational neck and back pain
  6. Improves focus and hence better hand eye co-0rdination

Because of all these benefits there can be better diagnosis and precise treatment execution.